NZA SERIES
amplifier
installationNZA SERIES
The new NZA multi-channel amplifier series responds to the present demands regarding remote management and systems integration. Thanks to its DSP module and its integrated Ethernet interface, these amplifiers turn into a powerful tool for signal processing, amplification and remote management, allowing the user to create centralized systems, distributed or hybrid, offering more flexible sound system options to the installer or designer and reducing dramatically the cabling installation costs.
The NZA range includes 5 models, of 4 or 6 channels and different powers. All of them feature convection cooling (fan less), being absolutely silent and suitable for its installation in the most demanding environments in terms of background noise.
As well as the NPA series, the NZA series can integrate in the increasing range
of products compatible with the EclerNet network, being the EclerNet Manager
software application its programming and remote control tool.
Main Characteristics
YouTube
Get familiar with the NZA configuration and remote control in just 5 minutes: visit out EclerNet Manager youtube channel at http://www.youtube.com/user/eclernetmanager
The new NZA multi-channel amplifier series responds to the present demands regarding remote management and systems integration. Thanks to its DSP module and its integrated Ethernet interface, these amplifiers turn into a powerful tool for signal processing, amplification and remote management, allowing the user to create centralized systems, distributed or hybrid, offering more flexible sound system options to the installer or designer and reducing dramatically the cabling installation costs.
The NZA range includes 5 models, of 4 or 6 channels and different powers. All of them feature convection cooling (fan less), being absolutely silent and suitable for its installation in the most demanding environments in terms of background noise.
As well as the NPA series, the NZA series can integrate in the increasing range
of products compatible with the EclerNet network, being the EclerNet Manager
software application its programming and remote control tool.
Main Characteristics
- Six available models: ◊ NZA4-70: 4 x 80 W RMS @ 4 Ω
- 4/6 analogue inputs routable to any output
- 4/6 volume remote control ports, each one assignable to one or various channels
- Editable channels independently (SINGLE mode) or in pairs (BRIDGE and PARALLEL modes)
- Integrated 4x4 or 6x6 DSP module
- Integrated EclerNet remote control module (includes control of all DSP functions and supervision and control of alarms, groups of amplifiers and/or channels, output voltage limiter, system log file, etc.)
- Silent cooling through convection, without fan
- Integrated anti-clip system
- Soft start in 180, 400 and 700 models
- RJ45 (Ethernet) remote control port
- Auto-Stand By function
- Euroblock type input, output and volume remote control connections
- 2 units rack height
◊ NZA4-180: 4 x 190 W RMS @ 4 Ω
◊ NZA4-400: 4 x 420 W RMS @ 4 Ω
◊ NZA6-70: 6 x 80 W RMS @ 4 Ω
◊ NZA6-180: 6 x 200 W RMS @ 4 Ω
◊ NZA4-700: 4 x 730 W RMS @ 4 Ω (4 x 1200 W RMS @ 2 Ω)
- Live sound (WiFi management is possible from a PC)
- Centralized, distributed or hybrid fixed installation
- Grandes sistemas zonificados de megafonía o Public Address
- Integration in installation global control systems
- Installations requiring remote supervision, diagnostic and adjustment via Internet
- WP series: remote level control panels
- REVO10A: remote level control wall panel
YouTube
Get familiar with the NZA configuration and remote control in just 5 minutes: visit out EclerNet Manager youtube channel at http://www.youtube.com/user/eclernetmanager
NZA6-180
amplifierAUDIO POWER
| NZA4-70 | NZA6-70 | NZA4-180 | NZA6-180 | NZA4-400 | NZA4-700 | |
| POWER 20Hz-20kHz 1% THD | ||||||
| 1 Channel @ 2Ω | 1220 WRMS | |||||
| 1 Channel @ 4Ω | 81 WRMS | 80 WRMS | 193 WRMS | 208 WRMS | 426 WRMS | 730 WRMS |
| 1 Channel @ 8Ω | 49 WRMS | 47 WRMS | 115 WRMS | 120 WRMS | 230 WRMS | 406 WRMS |
| All Channels @ 4Ω | 63 WRMS | 62 WRMS | 160 WRMS | 155 WRMS | 330 WRMS | 530 WRMS |
| All Channels @ 8Ω | 41 WRMS | 40 WRMS | 102 WRMS | 100 WRMS | 205 WRMS | 327 WRMS |
| 1 Bridge channel @ 8Ω | 152 WRMS | 150 WRMS | 365 WRMS | 380 WRMS | 760 WRMS | 1180 WRMS |
| 1 Bridge channel @ 4Ω | 2070 WRMS | |||||
| Overall Voltage Gain | +26 / +32 dB | |||||
| Frequency response (-1dB, -3dB) | 10Hz – 25kHz | |||||
| THD + Noise @ 1kHz Full power | <0.05% | <0.08% | ||||
| Noise Floor (FFT) 20Hz – 20KHz | >80dB (85dB typ.) | |||||
| Damping factor 1kHz @ 8Ω | >150 | >140 | >400 | >350 | >600 | >200 |
| Channel Crosstalk @ 1kHz | >60dB | |||||
| Input connectors | Terminal block (Symmetrical) | |||||
| Input CMRR/ref. Max. PWR | >55dB | |||||
| Signal present indicator | Lit at –40dBV | |||||
| Output connectors | Terminal block | |||||
| Anticlip limiter | Soft / Mid / Hard | |||||
| Volume remote control | (0-10VDC) (0.1A max.) 0V = no attenuation / +10V = full attenuation | |||||
| Remote control connectors | Terminal block | |||||
| Mains | Depending on your country. See characteristics in the back of the unit. | |||||
| Power consumption: | ||||||
| (pink noise, 1/8 power @ 4ohm) | 102VA | 137VA | 214VA | 297VA | 431VA | 729VA |
| (pink noise, 1/3 power @ 4ohm) | 198VA | 277VA | 466VA | 652VA | 948VA | 1610VA |
| Stand-by mains consumption | <3W | |||||
| Panel Dimensions | 482.6x88mm | |||||
| Depth (Handle excluded) | 390mm | 440mm | ||||
| Weight | 8.6kg | 9.65kg | 11.1kg | 12.9kg | 15kg | 19kg |
DIGITAL
| Processing: | |
| A/D & D/A | 24 bit, 48kHz. 105dB Cirrus Codec |
| DSP | 32/64 bits |
| Latency | 810µs |
| Analog Input headroom: | +18 dBV = +21dBu |
| Digital Input attenuator: | Stepless from –∞ to +0dB |
| Input Impedance: | Balanced, 22kΩ |
| Maximum Delay: | 1s (343.4m) for each channel |
| Delay resolution: | 20.8µs (6mm) |
| Compressor / Limiter: | |
| Threshold | from -36dBV to +18dBV |
| Ratio | 1:1 to ∞:1 (limiter) |
| Attack time | Auto or from 0.1ms to 500ms. |
| Release time | Auto or from 1ms to 5s. |
| Output peak voltage limiter: | |
| Peak voltage upon model (auto settings) |
From 10Vpk to 70Vpk |
| High & Low pass Crossover filters | Butterworth in 6/12/18/24dB/oct. |
| Bessel in 12/18/24dB/oct. | |
| Linkwitz-Riley in 12/24dB/oct. | |
| Parametric Eq types (8 max. per output) |
- Bypass / On-Off all channels |
| - Param. Eq. 20Hz-20kHz; -60/+12dB; Q from 0.3 to 200 | |
| - Low & High Shelf 6/12 dB/oct | |
| - Low & High Pass 6/12 dB/oct. | |
| - All-Pass 1/2 order | |
| Built In signal generator | - Sine (20Hz to 20kHz) |
| - Polarity (10/20Hz to 10/20kHz) | |
| - White | |
| - Pink | |
| Signal Mute | Yes |
| Signal Polarity Invert | Yes |
| Connectivity: | - Ethernet Base-Tx 10/100Mb, Auto X-Over, Cat5 |
SOFTWARE
| EclerNet Software | - Realtime full GUI of all functions and controls thru Ethernet with interactive graphical display |
| - Grouping mode channels or devices | |
| - Automated report generation | |
| - Remote power on with programmable delay. | |
| - Up to 256 devices on same net. | |
| - Autodiscovery devices feature | |
| - Routing capability through NAT gateways. | |
| - Real time metering at input/output (DSP) | |
| - Device “Finder” feature | |
| - Save & Recall setup and preset functions | |
| - Firmware update capability thru Ethernet | |
| - Password protection | |
| - Default Network configuration: | |
| IP: 192.168.0.100 | |
| Mask: 255.255.255.0 | |
| Gate: 192.168.0.1 | |
| UDP Port: 2210 | |
| Operating System: | Windows® W2000 Prof. (SP4); XP Prof. (SP3); Vista (SP1). |
| Minimum EclerNet System Requirements: | Pentium IV ® 1GHz |
| 256MB RAM | |
| 40MB HDD free space | |
| 800x600 pixels & 16bits color display | |
| 10/100 Ethernet Network card |
amplifierinstallation
amplifieramplifier
